Should I switch to regular shafts?

If you hit the ball longer than that, say 225-250 yards, you should probably choose regular shafts. Anything more than 250 yards, stiff shafts are for you. Unless you are a huge hitter and average about 300 yards on your drives, stay away from Extra-stiff shafts.

When should I switch to regular golf shafts?

If you're between 97 and 104 mph with the driver, you need a stiff flex. Regular – Now we are getting into the range where a majority of recreational golfers fall, and also where many LPGA pros fall. If you're between 84 and 96 mph, regular is going to be best for you.

Do any tour players use regular shafts?

Kramer's 2006 “Golf Magazine” article cites a survey showing that just 2 percent of PGA Tour players and 10 percent of PGA Champions Tour players used regular flex shafts in their irons. He also notes that PGA Tour swing speeds average 110 mph, so the players favor a stiffer shaft to better control the club.

Are regular shafts easier to hit?

The regular flex golf shaft is more flexible and easier for slower swing speed golfers to swing than the stiff flex golf shaft. A stiff flex golf shaft creates more resistance in the swing of a golfer. Therefore when they attempt to hit the ball with a bit more speed, they can get the incredible distance.

Will I lose distance with a stiff shaft?

If the shaft flex is too stiff, your average distance will remain low.

Will a regular shaft increase distance?

If you use a 6- or 7-iron to hit that 150 yard shot then a regular shaft will be the best for your game. By using a shaft-flex that is right for you, the club will work better and you will gain distance with much less effort.

What flex shaft does Tiger Woods use?

He currently uses a 60-gram Diamana D+ driver shaft in his TaylorMade M5 driver.

Who should use regular flex shafts?

Swing Speed

In general, golfers with a fast swing should use a stiff shaft and slowed swings should use a regular flex shaft. To check your swing speed a shot tracking device will be the most accurate method. Based on your swing speeds here are our recommendations: 80-95 mph swing speeds should use regular shafts.

Do pro golfers use stiff or regular shafts?

Most PGA Tour pros will use stiff or extra stiff in their shafts. It is rare to find someone swinging a regular shaft with the amount of swing speed those guys have.

Can a regular flex shaft cause a slice?

When the clubhead gets to the ball, the shaft won't unload properly and the face will remain slightly open, causing a slice. Other swing problems also can cause a slice, of course, but shafts that are too stiff can make the problem worse.

What shaft does DeChambeau use?

DeChambeau's driver is Cobra's King Speedzone with an L.A. Golf prototype shaft made just for DeChambeau. The loft is 5.5 degrees—similar to what most long-drive competitors use.

How far should you hit a 7 iron?

A standard amateur golfer can hit a 7 iron from 128 yards to 158 yards. The lower range will be for women and senior golfers. To hit the ball over 150 yards in total distance with a 7 iron club, an amateur golfer will have to have a good swing and be physically fit.

Do pro golfers use graphite shafts?

Graphite iron shafts have been used by PGA TOUR professionals for decades including FedExCup Champion Brandt Snedeker and US Open Champion Bryson DeChambeau. There's also a third option in iron shafts which may eventually fall into the “best of both worlds” category.

What happens if shaft is too flexible?

Having a shaft that is too flexible can also cause the ball to hook uncontrollably, because the shaft bends incorrectly, it will come through with a closed clubface causing the ball to go left, this is because the shaft can't handle your swing speed, and the head is rotating too much.

Whats the difference between stiff flex and regular flex?

The basics

The main difference is that a stiff shaft is harder to bend than a regular shaft. This is usually created by adding more material to make the shaft up which can often also make them slightly heavier. The more force you create in your golf swing (higher swing speed) the stiffer you will want your shaft.

At what swing speed do you need a stiff shaft?

In general, golfers with driver swing speeds over 95 mph should play stiff flex shafts, and those under 95 mph should play regular flex. Shafts also come in extra stiff (105+ mph) and senior flex (under 85 mph).

Should a high handicapper use a stiff shaft?

Designated as "S" on the flex chart, stiff shafts are recommended for golfers who regularly drive the ball 240 to 260 yards and have a swing speed 84 to 93 mph. Stiff shafts are appropriate for men with single-digit handicaps as well as some with handicaps 10 to 15 who have high clubhead speed.

Is Stiff flex good for beginners?

Beginners may acquire clubs from friends or family and not consider the flex of their shafts. Shaft options include senior, ladies, regular, firm, stiff, x-stiff. Length – shafts can be cut different lengths – for most beginners, standard length is fine, unless you are an abnormal height.

Does shaft flex really matter?

Shaft flex letters are 'essentially irrelevant,' according to an expert club fitter. The stiffness of a R shaft will differ by company. Most golfers in the world know that shaft flex makes a difference to performance and feel in golf.

Can you hit a 300 yard drive with a regular flex shaft?

Let me put it bluntly – No You Can't! If some guys on the PGA Tour can't hit it 300 yards – you can't either. Understanding the 'true distance' you hit the golf ball is more important than the 'bragging distance' you can hit it.

How can I tell my swing speed?

Divide the ball speed by 1.5 to get the estimated swing speed for your drive. Alternatively, you can divide the carry distance by 2.3 to estimate the swing speed at impact, but the result will not be as accurate.

What shaft does Rory McIlroy use?

The irons in his bag remain unaltered for 2022 with McIlroy gaming the the TaylorMade P770 3-iron and P730 Rors Proto irons from 4 to PW with Project X 7.0 shafts. McIlroy is also sticking by his TaylorMade MG3 wedges in 54 and 58 degrees, in Project X 6.5 shafts.

What shafts does Justin Thomas use?

Thomas switched to the Titleist TSi3 driver shortly after it was released in 2020 and used the same Mitsubishi Diamana ZF shaft for nearly three years. The TSi3 drivers come with a five-setting movable weight in the back of the head to help players and fitters create a draw or fade bias.

What driver shaft does Dustin Johnson use?

Full Specs. *The seven-wood, hybrids and utility come in and out of the bag regularly. Wedges: TaylorMade Milled Grind (52°, 60°) All have KBS Tour 120S shafts.

Do stiff shafts make a difference?

What's the difference between regular and stiff shafts? A stiff shaft is firmer and harder to bend than a regular shaft, and so more often than not, they're also heavier in weight. As a rough rule of thumb, the more speed you generate, the stiffer your shafts should be.