Is it better to have loose or tight trucks?

The faster you intend on riding, the tighter your trucks should be. Tight trucks provide stability at higher speeds, reducing the likelihood of catching the dreaded speed wobbles. If you're considering riding downhill, or if a vert ramp session is in your future, consider tightening your trucks for safety's sake.

How tight or loose should my trucks be?

Your trucks should be loose enough that you don't need to tic-tac to get around obstacles while skating around. Skateboard trucks can be set tight or loose, depending on the rider's preference. That being said, they should be tight enough that the kingpin won't fall out and loose enough that the bushings don't burst.

Are looser trucks better for tricks?

Loose trucks are harder to skate than tight trucks. There, I said it. That's not to say that tight trucks are easier, or that loosening up the kingpin nut a few turns is going to make you lose all your tricks. I'm talking about skating them loose enough to wobble when you shake the board side to side.

Are tighter trucks better for beginners?

Most start with pretty tight trucks and loosen them as time goes. Some may argue that tight trucks are more beginner-friendly. Indeed, at first, balancing on the board is already a struggle on its own, and riding super loose trucks will probably make things even more difficult.

What happens if your trucks are too small?

What Happens When Your Trucks Are Too Narrow. When you're trucks don't match your board and aren't wide enough you'll get the carpet riding effect. You won't be able to see your wheels, just your deck. Just a tad too small doesn't really matter but at a certain point, you'll run into trouble.

How do you know if your truck is too tight?

In most situations, tight trucks are a hinderance. They inhibit your ability to turn and make it difficult to line up on an obstacle. If you often find yourself having to press down on the tail when turning, it's probably time to loosen the kingpin nut.

Can you tighten trucks too much?

Don't tighten it too much or they can get damaged.

Why do loose trucks save lives?

Looser trucks enable you to turn and respond to situations better. Though you are more prone to speed wobbles with looser trucks, more experienced riders are able to prevent wobbles because of their stance, ankle strength and ability.

Do loose trucks cause speed wobble?

CJ: For starters, speed wobs can be caused by a number of different reasons. A common one being loose trucks. Loose trucks can give you too much turning ability, making your set up hyper-responsive for any speed over 10-20mph. If you're going faster than that, then you just might want to tighten your trucks.

Should front and back trucks be same tightness?

Not necessarily, you should do whatever feels most comfortable. I personally have mine the same so I can ride either direction and have it feel the same. That's a pretty standard downhillers setup for deeper carves. Generally not for riding switch though.

Do all bushings fit all trucks?

All trucks come with stock bushings, but some prefer to replace them. Not everybody weighs the same and skaters prefer different tightness on the trucks. Note that bushings need to break in a little before you can tell you want to replace them.

How do you break in a new skateboard?

Spend your first few skate sessions either skating on flat ground or basic riding in a mini ramp. Adjust the trucks after a few days of breaking in the new bushings. As soon as your board starts to feel normal—no tightness or awkward pulling off to one side—tighten the trucks as you would normally ride them.

Are skateboards supposed to wobble?

A wobbly skateboard isn't a bad thing, some actually like to ride their trucks super loose. Beginners will have a harder time learning to ride a skateboard with loose trucks. After all, a more stable board will help you keep your balance. Just be sure to break bushings in and don't tighten them until you squish them.

Why do skateboards wobble?

Wobbly skateboards are caused by bushings being too soft or the skateboard trucks being too loose. With just a few minor adjustments to the kingpin nut, you can solve this problem. It's really easy to fix actually and some don't even consider it a problem. Some people like loose trucks and others prefer them tight.

How loose should your trucks be on roller skates?

Loosen Your Trucks Bit by Bit

First make a quarter turn, because in roller skates, a tiny turn can make a big difference. If your trucks are super tight, do one or two full turns, but if your trucks are already loose and you want to loosen them more, do a quarter turn first.

How much should I loosen my trucks roller skates?

Trucks should not be loose enough for you to be able to wiggle them with just your fingers, nor should they be so tight that you cannot move them at all with full hands on the wheels.

How do I tighten my truck evenly?

To tighten your trucks, give the bolt clockwise turns. Do a couple turns and then stop, depending on what degree of tightness you feel is best for you. What if the trucks are too tight? Make counterclockwise turns until you get that sweet spot where skating your board would feel just right.

How can I make my skateboard more stable?

The easiest option to make your TKP more stable (ie, make your skateboard stable), is to simply tighten down the kingpin nut. Doing this makes the bushings deform and bunch up, and it makes your truck feel more stable.

Do skateboard trucks loosen over time?

If you've grown a little stiff in your riding routine, it's time to loosen things up. To loosen the trucks on your skateboard: Turn the board over so you can see both truck kingpins. Move a truck around, so you get a feel for its current level of tightness.

How do you balance yourself on a skateboard?

Position your front foot on the board and place the other foot on the ground just in front of that foot. Then, use your foot to push on the concrete and move your board and body forward. Keep a low center of gravity as you push. Bend your knees and balance your body weight over the foot that is on the skateboard.

How do you make a skateboard go faster?

6 Ways On Making Your Skateboard Speed Off

1. Use bigger wheels. Bigger wheels roll faster than smaller wheels. ...
2. Have new bearings every so often. Experts claimed that maintained bearings may tend to roll faster and smoother. ...
3. Opt for harder wheels. ...
4. Travel to steeper and smooth roads. ...
5. Try the tuck stance. ...
6. Maintain a straight line.

How long does it take to break-in trucks?

Break-in periods for vehicles used to be much longer than they are today, often exceeding 1,000 miles. Today, the recommended break-in period for many cars and trucks is 500 miles. Following proper break-in procedures can extend the life of your truck's engine.

Should I get soft or hard bushings?

Harder bushings result in stiffer turns. Importantly, how tight or loose you keep your bushings also effects your skateboard's turn responsiveness. Softer bushings are easier for your hanger to compress, and therefore it is easier to turn on softer bushings. Harder bushings result in stiffer turns.

Do you need washers for bushings?

For a double cone bushing combo we suggest that you use a small cupped washer to hold both cone bushings in place. Cupped washers grip the bushings and reduce the "slop" in the turn. Simple as that! You'll need a total of four small cupped washers for your board.