Do longboards use different bearings?

There is no difference between the skateboard and longboard bearings. Regardless of the size of your wheels or type of skating you do, street skate or longboard, the bearings are the same size. The only thing you need to pay attention to is the dimension of the bearing spacers.

Are all longboard bearings the same?

Standard longboard bearings are the same as any other skateboard bearings. You could use them on any board of any length. You'll need two bearings per individual wheel, and the bearings can be installed alone. Standard bearings are typically made out of steel or ceramic to achieve a smooth, speedy ride.

What bearings do longboards use?

Best Longboard Bearings

• Bones Reds Skateboard Bearings. ...
• Zealous Bearings for Longboards. ...
• Bronson Speed Co. ...
• Yellow Jacket Premium Bearings. ...
• Fireball Dragon Precision Bearings. ...
• CCS Premium Blue Steel Bearings. ...
• Bones Super Reds Bearings. ...
• Heady Shake Pro Longboard Bearings.

Do bearings matter longboard?

Absolutely not. Higher ABEC Rated bearings usually use better lubes and quality of materials. These kinds of things matter a lot for how the bearing will perform over time in the environment of skateboarding. Higher ABECs often mean a better bearing because they also use better lubes, materials, etc.

How do I choose longboard bearings?

Choosing longboard bearings can be as simple as buying ice cream from the store – so long as you know what it is you are looking for. Factors such as speed, durability load capacity, surface finish, lubrication, materials and tolerance separate good longboard bearings from the bad one.

What kind of longboard should a beginner get?

99% of beginners should start with a cruiser longboard. If you're looking for a beginner cruiser board, I'd recommend it being at least 30” long and 8.5” wide. A long, wide deck will be easier to balance on. The wheels should be large/soft (60mm-80mm / 77a-83a) so they roll over cracks/bumps with ease.

Are there different sizes of longboard bearings?

Bearings come in two sizes to fit on different truck axels. 8mm bearings are the standard size and the most common. 10mm bearings are used on trucks that are built for high speeds.

Do you need spacers for longboard bearings?

Bearing spacers are totally optional; longboarders and casual skaters likely won't put enough pressure on their boards to ever need them, though they are definitely a good investment if you want to slide, do a lot of tricks, and generally skate hard.

Do bearings make skateboard faster?

By keeping your bearings clean and properly maintained, you can expect nothing less than faster acceleration and over-the-top performance.

Are ABEC 11 bearings real?

ABEC from a precision standpoint refers to the Annular Bearing Engineering Committee (ABEC) of the American Bearing Manufacturers Association (ABMA). ABEC precision levels do indeed stop at level 9 (there is no ABEC 11 precision level).

Are longboard bearings and skateboard bearings the same?

There is no difference between the skateboard and longboard bearings. Regardless of the size of your wheels or type of skating you do, street skate or longboard, the bearings are the same size.

What are the fastest bearings?

The Bones Swiss 608 Skate Bearings have become legendary since their introduction in 1983. For decades, this has been perhaps the fastest, smoothest, and longest-lasting bearing on the market.

How can I make my longboard faster?

The best way to make your longboard faster is to mount bigger, medium-hard wheels with small to medium-size cores, so they have enough urethane to go fast and smooth on bumpy roads. Which exact wheels you will choose depends on your setup.

Are skateboard wheel bearings universal?

Almost every skateboard bearing is the same size and will fit on any skateboard wheel and truck. When choosing your bearings, it is important to think about your experience level and riding style. Bearings with higher-quality parts will be faster and more durable.

Are longboard trucks and skateboard trucks the same?

Although their purpose is similar, longboard trucks are extremely different than standard skateboard trucks. Longboard truck hangers are wider to accommodate the difference in deck size (most longboard trucks are either 150mm or 180mm).

Why does my skateboard feel slow?

Dirt and dust buildup and cause friction, resulting in a slower skateboard. Sometimes you don't even notice how much dirty bearings slow down your skateboard until you cleaned them or even replace them entirely. While you don't need top-notch skateboard bearings, quality bearings make a difference.

What bearings do pro skaters use?

What Are Best Skateboard Bearings?

1. Bronson Speed Co. G2 (Winner) ...
2. Bones Reds (Runner-up) Bones Reds are the most popular bearings because they are cheap and just work for all skateboards. ...
3. Bronson G3. ...
4. Bones Super Reds. ...
5. Bronson Raw. ...
6. Bronson Ceramics. ...
7. Bones Swiss 6 balls. ...
8. Bones Red Ceramics.

How long should my longboard wheels spin for?

How Long Should Skateboard Wheels Spin For? Your wheels do not need to spin freely for more than two seconds. That being said, you need to stand on your board and push around for a few minutes. If it's difficult to push or the board stops on it's own, loosen the wheels slightly.

Are all bearings the same size?

Unlike the wheels in which they fit into, all bearings have the same dimensions- 8mm (inner diameter), 22mm (outer diameter), and 7mm (width). Each wheel requires two bearings that are usually separated within the wheel by a spacer. Bearings are measured by an ABEC rating system (1, 3, 5, 7, and 9).

Can you ride without spacers?

If installed, bearing spacers can help increase the life of your bearings, allowing you to skate for longer without purchasing or replacing your spacers. If you skate aggressively without spacers, you run the risk of damaging your bearings during kick flips and sharp turns.

Do bearing spacers make difference?

As a necessary component to keeping the bearings in your wheels parallel and aligned, the role of spacers are sure to drastically increase performance. As you can see from the side angle of a deconstructed wheel, bearing spacers sit right in the between the inner races of each bearing.

Does it matter what bearings you get?

You can't go wrong. Nearly all skateboard bearings have been standardized so that all wheel and bearing brands are compatible. The standard skateboard bearing size is an 8mm inner race diameter.

Are ABEC 9 bearings fast?

ABEC 9 and higher bearings would be ridiculous to use in a skateboard unless you are doing downhill luge-style skating or something else where your goal is to go insanely fast. If you aren't spending a fortune on these bearings, then don't trust that they are, in fact, ABEC 9.

What is a 608 bearing?

The 608 is a 8 mm Ball Bearing that can be used in many rotary and factory automation applications. The 608 Miniature Ball Bearings is an open style bearing. The 608Z ball bearing is a single row raceway and single shielded. The 608ZZ ball bearing has a single row raceway and it is shielded on each side.

Are longboards easier to ride than skateboards?

Longboarding is easier than skateboarding. Longboards are wider, longer and have softer wheels which makes it much easier to keep your balance. Skateboards are harder to ride because of their smaller size and harder wheels. Skateboarding and longboarding are quite different sports and also have much in common.