Are 52mm wheels good for beginners?

Finding the best skateboard wheels all comes down to personal preference based on the kind of skateboarding that you want to do. TIP: If you are beginner, we recommend a mid-sized (52mm-54mm) skate wheel with a medium durometer (90a – 99a).

What are 52mm wheels good for?

Small 51mm – 52mm wheels

Wheels of this size are suitable for any type of street and transition skateboarding. They won't pick up too much speed when learning to ride down hills.

Is 52mm wheels good for street skating?

You can't go wrong with Spitfire's 52mm Bighead wheels. They have a versatile 99a durometer, meaning they're just about average and ideal for street or ramp skating, but they're still just soft enough for cruising to the skatepark. The wheels come in a range of widths, but for most purposes, 52mm is best.

What wheels are good for a beginner skateboard?

Skateboard Wheels for Beginners

Most beginners prefer to start with a 86-99A hardness and a 54-62mm size. The bigger the size, the more stability you can expect. As you get better, you'll want to go down in size. The lower the hardness, the more grip you can expect to have.

Are 53mm skateboard wheels good for beginners?

The best wheel size depends on what you want to do but in general wheels between 53mm and 54mm are a safe choice. Large wheels are faster compared to smaller wheels. Wheels over 58mm need riser pads to prevent wheelbite.

What wheels do street skaters use?

Wheel Size

A lower millimeter wheel is usually preferred for street skating, as they are lighter for flip tricks but more difficult to ride on rougher surfaces. The most popular street skating wheel sizes are between 52-54mm. A larger wheel helps you skate rougher ground and ride up transitions easier.

What size wheels are best for street skating?

Diameter 50-60mm, Durometer 95-101a

These hard wheels are the best skateboard wheels for park and street skating because they are lightweight, roll fast on smooth surfaces, and slide easily.

Are 99A wheels soft?

These wheels have a hardness (durometer) of 99a, making them incredibly hard, solid wheels. This is the most common durometer found in skateboard wheels used for shortboards.

Is 99A good for street?

96a to 99a are good wheels for all-around use. They offer a balance between grip and speed, making them a beginner's choice for both street skateboarding and for smooth surfaces like skate parks and ramps.

Are 54mm wheels good for cruising?

Coming with a 54mm wheel diameter, the Ricta Clouds 78a Skateboard Wheel fits best with my small cruiser skateboard. It features a modern shape that's not bulky and is not heavy to ride. I feel light when cruising around the town and filming using this brand.

What are the best bones wheels?

BONES STF wheels outperform all other wheels, and because they wear so well, they last several times longer than normal wheels, making STF wheels the best for less. BONES STF wheels are available in the original 103A and the new 99A Street Tech Formula™ for greater roll, control and softer landings on rougher terrain.

Are 101A wheels too hard?

The most popular wheels in this category are 99A to 101A. Hard wheels have a very slippery, plasticy feel. They are smooth and fast on smooth surfaces, but are chattery and unpleasant to ride on rough terrain. When it comes to Soft Skateboard Wheels they are usually between 75A and 95A.

Is it easier to Ollie with smaller wheels?

Small wheels make it easier to land tricks, even when they feel a bit sketchy. Bigger wheels will cause you to fall when you land a trick a bit sketchy but smaller wheels still allow you to land a trick without running the risk of hurting yourself.

Are Bigger wheels better for transition?

Transition / Vert Skating (50-60mm) – A larger wheel will be more stable at higher speeds and perform better on ramps and transition.

Is there a big difference between 99a and 101a?

It's a hardness that provides great grip on most street surfaces while retaining speed, pop and a smooth ride. Being slightly softer than the harder 101a, the 99a is slightly more forgiving on impact. 101a duro is more suited to smoother transitional skateparks and ramps.

Are 87A wheels good?

75A-87A Skateboard Wheels

These are extremely soft wheels. They were designed to be used with longboards or with standard skateboards rolling over rough surfaces. They have a lot of grip and will absorb the impact of bumpy streets and roads and cracks in the pavement.

Is 80a a soft wheel?

Wheels rated between 80a to 83a are balanced between soft and hard, giving the rider the freedom of control, speed, and grip.

What size wheels does nyjah ride?

Features: One (1) set of 52mm Ricta Wheels Nyjah Huston Naturals II White Skateboard Wheels - 99a; includes four (4) wheels. Diameter: 52mm. Durometer: 99a.

Are 58mm wheels too big?

58 - 60mm - The standard modern vert & big bowl skaters choice, although not needed to shred the smaller parks. The bigger, and taller the bowl, then go up on wheel size. Unless you're skating something like the combi at Vans I wouldn't worry too much about getting bigger than a 58mm wheel.

Are soft wheels good for tricks?

Soft skateboard wheels are suitable for cruising and a comfortable ride. They don't excel at tricks because they bounce a lot and stick to the surface. They deal better with small objects and rough roads. Hard wheels are more for skateboarders that like to perform technical tricks, but not suitable for cruising.

Are Bigger wheels better for skateboarding?

Skateboard wheel size helps determine how fast you'll go and how technical your ride will be. Larger wheels allow you to have a smoother, more comfortable ride. They are also better for riding through different terrain. Smaller wheels are better for tight turns and tricks.

Are Bones Wheels Good?

Bones wheels are the best wheels I have ever got my hands on. They never flat spot, they ride great on rough floor and smooth skateparks. They are thee best wheels in the skateboarding industry. A company that I'm glad I support.

What wheels does nyjah use?

The Leader in “Speed Reinvented” Wheel Technology. Ricta Wheels are made with “NRG” Hi-Energy Urethane Formula, hands down the fastest non-cored wheel in skateboarding! Pro tested and proven more flat spots resistant than any other wheel on the market.